
G1000 System Maintenance Manual - Hawker Beechcraft G36 Page 3-5
190-01259-00 Rev. 5
3.6 G1000 Software Information
NOTE
The following sections provide a detailed description of loading all G1000
software and configuration files, which may be excessive for individual
LRU removal and replacement. If removing and replacing individual
LRUs, refer to Section 5.6 of this manual for the necessary steps.
3.6.1 Loader cards
NOTE
The G1000 has various features that require the use of unlock/enable
cards to activate the feature. Throughout this document these cards are
generically referred to as enable cards. In some cases, the actual label
on the physical card may say unlock. If uncertain, the technician should
verify the card part number prior to use.
Table 3.1 - Required Loader Cards
010-00726-07 ¹
or
010-00726-08 ²
or
010-00726-09
3
G1000/G36 Loader card (contains 006-B0858-07 Software Image)
or
G1000/G36 Loader card (contains 006-B0858-08 Software Image)
or
G1000/G36 Loader card (contains 006-B0858-09 Software Image)
010-00330-43
(2 Required) Terrain/Obstacle/Airport/Supplemental Data plus
Garmin Safe Taxi and NOS Flight Charts (Remains in the bottom
slot of the PFD and MFD)
010-00330-50
ChartView Enable Card (see note)
010-00330-51
TAWS Enable Card (see note)
010-00330-54
SVS Enable Card (see note)
¹ 010-00726-07 Loader card contains the 006-B0858-07 software image and is only
compatible with aircraft that have GIA63W P/N: 011-01105-01 installed.
² 010-00726-08 Loader card contains the 006-B0858-08 software image.
3
010-00726-09 Loader card contains the 006-B0858-09
software image.
3.6.2 G1000 Software Image
All software and configuration files were certified by Garmin as part of the FAA-approved Type
Design data. Approved software and hardware definitions are defined on the General
Arrangement drawing 005-00620-06.
G1000 software and configuration files are controlled via the approved software image part
number listed on the General Arrangement drawing 005-00620-06. This software image is
loaded into the G1000 using a software loader card.
NOTE
Installers may obtain the G1000 software image already on a loader
card by ordering the Garmin Part Number listed in the General
Arrangement Drawing 005-00620-06 referenced in Table 1.1
Commenti su questo manuale