Garmin GNS 530 Manuale Utente Scaricare il pdf (Pagina 99)

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. H

SECTION 6

PROCEDURES

6-17

Vectors to Final

Take a second look at the ‘VOR 22’ approach into

Billard Municipal. Instead of following the DME arc, ATC

tells the pilot to expect vectors onto the nal approach

course. There are several ways to select ‘vectors to nal’

with the GNS 530. The ﬁrst two options below normally

require the least workload to accomplish:

• When the approach is rst selected, choose

‘VECTORS’ from the Transitions Window.

• Load a full approach (including the IAF from the

Transitions Window) as described in Section 6.1.

When cleared, press the PROC Key and select

‘Activate Vectors-To-Final?’.

• Load the full approach as described in Section

6.1. Use the Direct-to Key (by pressing it twice)

from the Active Flight Plan Page to select the

desired leg of the approach.

Selecting ‘VECTORS’ from the Transitions

Window:

1) Select Billard Municipal (KTOP) as the

destination, using the Direct-to Key, or as the

last waypoint in a ﬂight plan.

2) Press the PROC Key and select the ‘VOR 22’

approach using the steps outlined in Section

6.1.

3) From the Transitions Window, select ‘VECTORS’

(Figure 6-41).

Figure 6-41 Transitions Window

4) Select ‘Load?’ (or ‘Activate?’, if already cleared

for the approach).

Activating vectors-to-ﬁnal from the

Procedures Page:

1) Select Billard Municipal (KTOP) as the

destination, using the Direct-to Key or as the

last waypoint in a ﬂight plan.

2) Press the PROC Key and select the ‘VOR 22’

approach using the steps outlined in Section

6.1.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 287 288

Commenti su questo manuale

Nessun commento

Garmin GNS 530 Manuale Utente Pagina 99

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature per l'aria compressa Garmin GNS 530